macOS Wi-Fi Roaming

One of the nice things about Intel wireless chipsets is that the drivers expose a lot of controls to help tune the chipset’s operation. One of my favorite of these controls is “Prefered Band,” which I usually adjust to instruct the chipset to prefer the 5 GHz band over the 2.4 GHz band. There are some other useful controls like “Roaming Aggressiveness” and you can also enable Fat Channel Intolerance if a neighbor is rudely using 40 MHz of spectrum in 2.4 GHz.


Although macOS has many advantages over Windows when it comes to Wi-Fi, such as the ability to natively do packet captures with the internal chipset, macOS doesn’t have the same level of customization as a Windows machine with an Intel chipset. And my experience has been that Mac clients don’t roam particularly well. Too often they are “sticky clients” and you need to disable/enable Wi-Fi on them to get them to associate with a better BSS.

Here’s a screenshot for a MacBook Air which wouldn’t roam away from a BSS whose RSSI has fallen to -80 dBm, while the laptop was only able to transmit at MCS 0, 7 Mbps. However there was another BSS in the -60’s which would have allowed for much better Wi-Fi performance.

Why is the native macOS Wi-Fi menu showing a full signal with -80 dBm RSSI and MCS 0? Wi-Fi Signal tells the real story.

In 2016 Apple published a webpage that explains how macOS makes roaming decisions and what roaming features it supports. This is very helpful and I wish other manufacturers would do the same. The algorithms that control client roaming are usually a black box, so Wi-Fi engineers have make a lot of assumptions about them when designing WLAN’s for clients that require efficient roaming. That said, while Apple says Macs should usually roam at -75 dBm, that doesn’t match my experience. Sometimes Macs are just sticky.

One reason for this is that once the roaming threshold is crossed, a Mac will only roam to a BSS that is 12 dBm louder than the current BSS, which would require a roaming candidate BSS to have an RSSI of -63 dBm or better before roaming will occur at -75 dBm. There doesn’t appear to be any way to modify this value.

Enabling 802.11k or 802.11v won’t help because macOS does not yet support those features, although they don’t prevent Macs from using an SSID that has them enabled. 802.11k and .11v are supported in Windows 10, however, if the wireless adapter supports those features.

There is an old plist that once controlled “opportunistic” roaming behavior, which I suspect meant roaming above -75 dBm RSSI.


…which has these defaults in macOS 10.12 Sierra:

    deltaRSSI = 10;
    disabled = 0;
    useBonjour = 0;
    useBroadcastBSSID = 1;

That looks promising, however, this plist hasn’t been used by macOS since macOS 10.10 Yosemite. It’s ignored by the OS now, and when it was utilized, it wasn’t intended to be user-editable, so changes were likely to be overwritten by the OS.

So if you are an enterprise with a fleet of Macs to manage and you run into sticky client issues, consider infrastructure features like Cisco’s Optimized Roaming or Aruba ClientMatch to force better roaming behavior among these clients.

To observe roaming behavior on a Mac, I recommend WiFi Signal from Adrian Granados. It can be setup to generate macOS notifications when roaming events occur or the RSSI of the AP drops below a certain threshold.